How To Set Up Led Strip Lights From Amazon

The installation guide is for 12V LED strip light kit. LED strip Lights are dandy for decorating your abode. Its simple and superb design tin can embellish the color of the dwelling house stereo infinite and enhance the atmosphere.

At present yous can sentry the video or follow the steps below to cheque how to install, cut and connect LED strip lights.

Role 1. How to Install LED Strip Lights

Part 2. How to Cut LED Lights Strip

Part 3. How to Connect LED Strip Lite Sections

Part ane. How to Install LED Strip Lights?

Footstep ane. Dry out and clean the surface

Before adhering whatsoever strip lights, make clean the surface of the area yous will be placing the lights on. This is vital to keeping it mounted for a long time to come. It is recommended to utilise your strip lights on smoothen stable surfaces. It should not be placed on rough or textured surfaces or whatsoever surfaces that can curve or motion.

Step ii. Unroll the low-cal strip, stick to the surface

The LED strip lights come up rolled on a spool. Only unroll the length of lighting you will be working with, remove the adhesive backing and stick to the desired surface. Press down on each part of the strip so it is firmly adhered to the surface and has no air bubbles.

Yous can employ fixing clips to strengthen the strip lite'south installation and ensure they stay in identify. Skin off the adhesive tape and utilize it to the surface with the non-pasty area over the strip low-cal. If you choose, y'all tin secure the clip farther past screwing it to the surface.

Discover: Not all of the LED strip lights on lepro.com are equipped with the fixing clips, please cheque the new models if needed.

Step 3. Connect LED lite strip and turn on the light

Once your strip lights are secured, you tin can attach it to the controller and ability adapter, then plug it into an electrical outlet. Using the remote control, remove the insulation sail first, press any color on the remote control to change the lighting colour.

Part 2. How to Cut LED Lights Strip

Each strip light has special designated sections where you can cut the strip. Be sure to brand a make clean straight cut but in these designated sections. Cut information technology in a not-designated area volition damage the strip lights.

Part iii. How to Connect LED Strip Lite Sections

Did y'all know you can pattern your strip lights to make twists and turns, go around corners or even over non-flat surfaces? Use the corner or straight flexible connectors and connector clips.

To join two strip light sections together, use a connector clip. Push the open finish of each strip into the clip, so shut it to lock it in.

To make your light strips go around a corner, utilise one corner connector and 2 connector clips.

Yous tin can fifty-fifty brand your strip lights go over uneven surfaces if you need to. Connect a flexible strip connector to the strip lights and over the uneven area. Connect the other cease to the rest of the lighting.

At present you tin can experience free to change and choose the light color temper you lot want. If you use a remote control, don't forget to unplug the battery insulation sail before use.

For rough surfaces, you may demand to install mounting clips to keep the strip light stable. For moist places like bathrooms, waterproof strip lights are recommended. And now you can check the LED strip lights category to get more than.